News Center_Mould-Composite-Taizhou Huacheng Mould Co., Ltd

Taizhou Huacheng Mould Co., Ltd

NEWS

Several impregnation methods for continuous fiber thermoplastic composites

The impregnation methods of continuous fiber thermoplastic composites mainly include solution impregnation method, melt impregnation method, powder impregnation method, slurry resin deposition method, mixed weaving method, thin film stacking method and reaction impregnation.

03

2025

/

04

The whole process of carbon fiber SMC compression molding

SMC (abbreviation of Sheet Molding Compound, that is, sheet molding compound), carbon fiber SMC is a sheet molding compound formed by infiltrating short-cut carbon fiber, matrix resin, additives and other materials according to a certain ratio and using professional molding processing equipment according to a certain process.

03

2025

/

04

Several impregnation methods for continuous fiber reinforced thermoplastic composites

The impregnation methods for continuous fiber reinforced thermoplastic composites mainly include solution impregnation, melt impregnation, powder impregnation, slurry resin deposition, commingling, film stacking, and reactive impregnation.

03

2025

/

04

The entire process of carbon fiber SMC molding

SMC (Sheet Molding Compound), carbon fiber SMC is a sheet molding compound formed by impregnating short cut carbon fiber, matrix resin, and additives with a certain ratio using professional molding and processing equipment according to a certain process.

03

2025

/

04

Reinforcement materials in thermoplastic composites

In recent years, fiber-reinforced thermoplastic composites based on thermoplastic resins have developed rapidly, setting off a worldwide boom in the research and development of such high-performance composite materials. Thermoplastic composites refer to composite materials made with thermoplastic polymers (such as polyethylene (PE), polyamide (PA), polyphenylene sulfide (PPS), polyetherimide (PEI), polyetheretherketone ketone (PEKK), and polyetheretherketone (PEEK), etc.) as the matrix and various continuous/discontinuous fibers (such as carbon fiber, glass fiber, aramid fiber, etc.) as reinforcing materials.

21

2025

/

03

LET-D molding process and application introduction

LFT-D molding process (Long-Fiber Reinforce Thermoplastic Direct) is a new long fiber reinforced thermoplastic composite process technology, is a long fiber reinforced thermoplastic composite online direct production of products of a process technology.

05

2024

/

09

< 1 2 3 4 5 >

Huacheng mold to become a professional manufacturer of composite mold industry

Home
About Us
Product display
News
Contact Us

Contact Us

Contact: Fan Qionglin 86-18858635168

E-mail：fql@hc-mould.com

Address: Chatang Village, Baihe Town, Tiantai County, Taizhou City, Zhejiang Province

Taizhou Huacheng Mould Co., Ltd Powered by www.300.cn SEO

Business License

Online message